Many VPN clients rely on the TAP-Windows Adapter V9 virtual network kernel interface to establish a VPN connection. Low-level kernel support for Ethernet tunnelling is incorporated into tap drivers to ensure tap devices perform properly.

At most cases, the Tap Windows Adapter V9 driver can be found in C:/Program Files. Hardware network adapters do not provide any protection.

Many of the consumers have been claiming that their internet connection is not working while Tap Windows Adapter V9 is active. It can also be done if the adapter enables itself automatically at the following boot after disabling via Device Manager.

Error
Error

It’s unclear what the purpose of the Tap Windows Adapter is. Tap Windows is a virtual Tap device that can be used on Windows. Installing the TAP-Windows Adapter V9 driver is unnecessary because VPN installers contain it and they immediately install the software with the VPN.

As a result, many of the VPN services have it pre-installed. It’s a network driver that’s unique. After you’ve installed the VPN client, you’ll see it in your device manager. If not all most of the VPN suites use this adaptor to connect to the internet privately.

As a result, there are two types of Windows Tap drivers:

On Windows XP, use the NDIS 5 driver (Tap-windows, version 9.9.x).
Tapping on Windows 10/8/7/Vista with the NDIS 6 driver (Tap-windows, 9.21.x).

These drivers can be problematic on occasion. We’ll have a closer look at them when we get a chance.

Windows Adapter V9 (Tap) Reinstallation Guide

Troubleshooting should begin by checking to see if the Tap adapter has been installed correctly and reinstalling it, if necessary, if you notice any symptoms of corruption in the device. Reinstalling it is as simple as following the instructions listed below:

Step 1: Disconnect from the VPN and close the VPN programme that is associated with it. Use “Windows + R” to launch a search box and type in your search term(s).

Step 2: In the search box, type “devmgmt.msc” and press Enter. You’ll be able to access the device management by clicking on this link.

Expand the drop-down option in the device manager to find network adapters.

Tip 5: Look for an exclamation mark in the TAP-Windows Adapter V9 icon. A driver reinstall is all that is needed to fix this problem in most cases. Select Uninstall device from the context menu when you right-click on the driver.

Step 3: Reopen the VPN client after deleting the Windows Tap adapter from the device management (Step 6). Step 7. A prompt will appear asking if you want to install the Windows Tap driver, or it will install automatically.

Step 4: It’s important to know that uninstalling Windows and then reinstalling the VPN client should fix any issues with a “missing driver problem.” VPN client installation kits are included in the TAP-Windows Adapter V9.

Next, check to see if the yellow exclamation point has been removed from the Device Manager in Step 7. If it isn’t, you can either contact your VPN and ask for assistance or start shopping around for a new VPN service.

How Do I Get Rid of It?

You would think that deleting the TAP-Windows Adapter V9 driver from the device management would be as simple as that. In some cases, the adapter will reappear in the device manager every time your system boots up, depending on the VPN software you have installed.

A startup service that checks for missing drivers and then instals any essential ones is responsible for this problem, which can be found in several VPN apps. Steps for uninstalling Windows Tap Adapter have already been provided. Please follow these instructions to remove it.

Leaving this step unfinished will cause the driver to reappear on your computer the next time you launch the VPN client. To ensure that the driver does not reinstall on your system, you must stop the software that requires it. To do this, follow the steps outlined below.

Step 1: In the first step, press “Windows + R” to open a search box. Next, type “appwiz.cpl” into the search box and press Enter. The “Programs and Features” window will be opened.

Step 2: Open the VPN software. Uninstall the VPN client by selecting it with the right-click menu. Reinstalling Tap Windows Adapter V9 after removing previous solutions is not recommended unless you have thoroughly removed all previous clients.

Conclusion

Many Windows Tap Adapter customers are baffled and don’t know where the device originated from. You should now be able to tell which scenarios necessitate the TAP-Windows Adapter V9 and which ones necessitate the TAP-Windows Adapter V9.

Leave a comment

Your email address will not be published. Required fields are marked *