In most cases, the error code 0x80300024 is accompanied by a notice that reads “Windows cannot be installed at this location.” An issue with the hard disc partition is indicated by Error Code 0x80300024.

Take a deep breath and calm down when you encounter the Error 0x80300024 during the installation or reinstallation of the operating system. 0x80300024 Error Repair is what we specialise in.

Error
Error

Windows is Unable To Install to the Selected Location: Error 0x80300024

The best solutions for 0x80300024 Error will be discussed in this article.

1. Use a Different USB Port For The Installation Drive

If you’re using a USB flash drive to install the Windows operating system, this approach is guaranteed to fix the 0x80300024 issue. Most individuals connect their USB drives to the wrong port, therefore this could be the problem.

Switch the drive to another port and see if it works for installing the OS. Install Windows again when this procedure has been completed.

2. Computer’s Boot Sequence

The problem 0x80300024 may be caused by the fact that the Windows file you are trying to install is not at the top of your computer’s boot order. Booting the Operating System is controlled by a specific set of commands that are unique to each computer.

You can fix the error by rearranging the discs in your computer’s BIOS on startup. Try the following:

Step 1: The first step is to open your computer or PC. Secondly, when your computer starts up, go to the BIOS settings menu and make your changes. Del or F1 or F2 can be used to enter the setup. The BIOS can be accessed by pressing the specified key.

Step 2: Look for your PC’s boot configuration in the BIOS after you’ve accessed it. Under the Boot tab of the BIOS, the boot order is usually accessible. This is the fourth and last step in the process of installing Windows on a new hard drive.

You can now quit the BIOS, provided you remember to save your modifications. If the aforementioned procedures have been followed, restart the Windows installation and see if it worked.

3. Change The Location of The Installation

As previously stated, the Error 0x80300024 may occur if the location where Windows is being installed already contains old data. This results in a lack of storage for new files. Previous data on the destination drive may interfere with the installation process.

As a result, we recommend that you format the drive from the installation site in order to make more room. Performing a drive format will help you resolve this issue if it is the cause of the error. The following are the steps you need to take:

Step 1: Restart your computer after inserting the Bootable Windows installation DVD in Step 1. Creating an installation media is necessary if you do not already have one.

Step 2: Choose to boot your computer from the inserted installation media when your system starts up. This is the third and last step in configuring your language, keyboard layout, and accepting the other licence terms.

Step 3: When asked what style of installation you prefer, select bespoke. Once the installation is selected, select Drive Options (advanced) from the drop-down menu that appears. Select the partition where you wish to install Windows, and then click on Format to begin the process of erasing it.

Once the drive has been cleaned, confirm the operation and wait for it to complete. Restarting the installation procedure is the final step in the process.

4. Removing Unnecessary Hard DrivesĀ 

Windows installation can be hampered if the other hard drives attached to your computer interfere with the process, resulting in a 0x80300024 Error Code or a failed installation. If the problem persists, we recommend that you remove the other hard drives on which you do not need to install the window and reinstall it.

5. Changing Your Hard DriveĀ 

Unless you were able to fix the issue 0x80300024 using one of the previous methods, you should assume that your hard drive needs to be replaced.

A new computer is needed since the hard drive you’re currently using can be defective and thus producing an error throughout the installation process. The error 0x80300024 will no longer be a problem if you replace your old hard drive with a new one.

Conclusion

To the best of our ability, we were able to assist you in eliminating Error Code 0x80300024. You can use any of the following methods to find out what’s causing your device’s fault and fix it.

Also, if the Fault 0x80300024 persists, we strongly recommend that you use the tools listed above, as they will undoubtedly meet your needs in terms of fixing the error.

Leave a comment

Your email address will not be published. Required fields are marked *